Demagnetisers are available for rapid demagnetization of objects after test. Various models are available for selection depending on job dimension and geometry.



2] SPECTROLINE UV LAMPS

( UV Light ) Black light or ultraviolet light is used for Non Destructive Testing with Fluorescent Magnetic particles or fluorescent Dye Penetrant.

Model : High Intensity Lamps: BIB-150P Ballast UV Lamp



      FEATURES:
      • Precision engineered
      • Unique engineering polymer housing
      • 150-watt Built-In-Ballast bulb
      • Lightweight and ergonomically designed
      • Unsurpassed safety and convenience
      • Choice of bulbs provides unbeatable versatility
      • Special Bulb-Saver extends bulb life
      • Flexible, silicone rubber filter holder
      • FREE UV-absorbing glasses included with every lamp.

      OPERATING VOLTAGE:
      • 120V/60Hz
      • 240V/50Hz

      CABLE LENGTH:
      • 8Ft.
      • 20Ft.
      • 30Ft.

Model : High Intensity Lamps: CH-50P/12



      FEATURES:
      • High Performance - Produces higher UV intensity than competitors 12-volt lamps.
      • "Instant On" Operation- Enables you to perform inspections immediately at the push of a button without waiting for warm-up.
      • Impact-Resistant, Dent-Proof Housing- Made of a super-tough engineering polymer.
      • Compact Lamp Head- Only 51¼4W x 71¼2"L (13 x 19 cm) at its widest point, its compact size enables you to work in tight          spaces.
      • Excellent Portability- Battery-operated unit weighs only two pounds.
      • Longer Battery Life- Consumes 50% less power than competitors 12-volt lamps, doubling battery life.
      • Versatile Dual Connections- Includes a 4-foot (1.2 m) cord with cigarette-lighter plug and a 1-foot (0.3 m) adapter cord with          alligator clips.
      • Connects to any 12-volt battery or cigarette-lighter outlet.
      • A 12-foot (13.6 m) extension cord is also provided.
      • Flexible Silicone-Rubber Filter Holder- Can be removed without tools for quick and easy bulb replacement.
      • Filter Protector/Lamp Stand- Helps prevent filter damage and serves as a convenient stand.
      • Free Safety Glasses- UV-absorbing glasses are included at no extra charge
      • Battery Pack Accessory- Compact, lightweight (only 7 lbs.) BP-12A battery pack comes complete with a 12V 7Ahr sealed lead
        acid rechargeable battery and a charger in a weather-resistant case with a shoulder strap. Permits field use of the CH-50P/12
        lamp in areas where an AC outlet is not available

3] UV LIGHT METER (Spectronics USA)

Model : DM – 365 XA



Sensor Head Specifications :

Overall Accuracy : Better than ±5% with reference to NIST standards

Spectral Range : 320-400 nanometers (nm)

Measuring Range : 0-19,990 µW/cm2

Resolution : 10 µW/cm2

Filter : High quality, vacuum-deposited, interference type

Power Requirements : 4 non-rechargeable ‘‘AA’’ size alkaline battery cells are included as standard

Reference Conditions : Temperature: 23°C ±1°C Relative Humidity: 30 to 60% Atmospheric Pressure:
575 to 800mm Hg to 7,500 ft. (2,286m) altitude.

Calibration of UV Meter
Calibration services for U.V Meter and Lux Meter, available. Ask for the details.

4] LUX METERS

Model : LUX METER LX 101



Range : 0 to 50,000 Lux

Specifications:

Range Resolution Accuracy:

5] MAGNETISING CABLES & PRODS

High Quality low resistance Magnetising cables with connecting lugs.

Available lengths : 2.5 mtrs. and 5 mtrs.
Contact prods : Contact prods with handle & remote switch available

6] MAGNETIC POWDER BLOWER





8] FIELD INDICATORS(Pie Gauge) :



• To check the strength and direction of Magnetic Field
• Made as per ASTM – Sec-V, SE 709 / A-275



9] TEST PLATES FOR YOKE TYPE CRACK DETECTORS:



• Test Piece for checking longitudinal field of Yoke Type Crack Detector
• Test bar of square cross section with holes drilled in the transverse direction to depth of 1 mm, 1.5 mm, 2.0 mm, 2.5 mm,
  3.0 mm from top surface
• Suitable to evaluate the function of Yoke Type Crack detector to detect near surface and subsurface defects

10] STANDARD LOAD TEST PLATE FOR YOKES:

• Load Test Plate for checking the lifting power of Yoke Type Crack Detector
• Load Test Plate – Weight 4.54 Kgs ( 10 Lbs.) for checking lifting power of YOKE in AC mode
• Load Test Plate – Weight 18.18 Kgs ( 40 lbs.) for checking lifting power of YOKE in DC mode



11] ARTIFICIAL FAULT TEST PLATE FOR PROD TYPE CRACK DETECTORS:

Test plate to check the performance of Prod Type Portable & Mobile crack detectors. The standard test plate is made as per design of Bharat Heavy Electricals Limited [BHEL]. It has grooves of depth 1 mm, 2 mm, 3 mm, 4 mm and 5 mm from top surface. The prod tips are placed with prod spacing of 100 mm to 150 mm over each line and dry magnetic particles are sprayed over. The appearance of lines determine the adequacy of magnetizing current as well as quality of magnetic powder.



12] PERFORMANCE TEST PLATE as per ASTM E -709:

13] KETO'S RING:



Keto’s ring useful for bench type MPI machines



14] CENTRIFUGE TUBE WITH STAND

• To check the concentration of Magnetic Particles in the bath
• Graduated measuring glass as per ASTM design
• Supplied with stainless steel stand

15] GAUSS METER (Digital):

Portable Gauss meter works on Hall’s principle. It detects, measures and displays the strength of magnetic field in Gauss.
Range : 0 – 20,000 Gauss



16] RESIDUAL FIELD INDICATOR:



• Detects very week residual magnetic field of the range 10 gauss
• Very useful when the demagnetisation of the part is required
• Range : - 10 : 0 : + 10 gauss

17] FLUX INDICATOR STRIPS (Burmah Castrol):

The strip type specimen is attached to the magnetized specimen. The magnetic flux in the specimen is sensed by the indicator and can be detected by application of magnetic ink when the flux value is more than minimum value required for defect detection. The indicators are a sandwich of magnetic foil in which are fine slots to simulate defects. Particularly useful for Wet particle examination.