A] WIRE TYPE IQI’S AS PER EN-462 – 1 1 FE EN, 6 FE EN, 10 FE EN, 13 FE EN
B] WIRE TYPE IQI’S AS PER ASTM E – 747 Set A, Set B, Set C, Set D
C] WIRE TYPE IQI’S AS PER BRITISH STANDARDS BS – 3971
D] WIRE TYPE IQI’S AS PER IS – 3657 FE-1, FE-2, FE-3, FE-4, FE-5

2] HOLE TYPE PENETRAMETERS ( As per ASTM E-1025/ E-142)


 
Designation : 5, 7, 10, 12, 15, 17, 20, 25, 30, 35, 40, 45, 50 60, 80, 100, 120, 160, 200

NOTE:
1] PLEASE SPECIFY THE MATERIAL OF PENETRAMETERS WHILE ORDERING
2] PENETRAMETERS OF STAINLESS STEEL CAN BE USED FOR ALL FERROUS AND STEEL ALLOYS

3] LEAD IDENTIFICATION MA



Lead Letters : A – Z
Lead Numbers : 0 - 9

Size available: 5 mm, 7 mm, 10 mm, 12 mm, 19 mm ( 3/16”, ¼”, 3/8”, ½” ¾”)
Style: Standard and Deep drawn ( Heavy thickness)

4] LEAD MARKER ‘B’ FOR BACK SCATTER

Available size: ½” and 15 mm [Meets ASME Section V requirements]

5] LEAD MARKER STORAGE BOX


It is a 38 compartment case designed to hold both lead letters/numbers and penetrameters.
It is made from high impact plactic with sponge inside cover to prevent mixing of numbers.

6] PENETRAMETER STORAGE BOX


It is a 28 compartment case. It has a strong wooden construction with foam insert to lid keep penetrameters firmly in place.

7] LEAD NUMBER TAPE

Measuring tape with lead markers at predetermined spacing. Lead marker tape is fixed adjacent to the weld while carrying out radiography. The image of lead numbers tape with numbers spaced at 5 cm or 10 cm ( 1”, 2”,3”) is printed as radiographic image. This helps in easy location of defects.
Lead Marker tape is available in various lengths from 0.5 Meters to 30 Meters.( 6” to 60 ft) Longer tapes and special requirements can be made on request.

8] LEAD INTENSIFYING SCREENS




Finest quality Lead screens duly lacquered for longer life.
Flexible with plastic sheet backing- for longer life.
Pairs of front and back screens.

Thickness of Front / Back screens

Size: 0.125mm (0.005”) , 0.250mm(0.010”)

Available sizes in cm : 30X40, 15 X 40, 10 X 40, 7.5 X 40, 10 X 20, 7.5 X 20
Available sizes in Inches : 14”x17”, 12”x15”, 6”x15”, 4”x15”, 3”x15”, 4”x7 ½”, 4”x5”

Screens in Roll Form

Available thickness: 0.1 mm, 0.125mm ( 0.004”, 0.005”)
Size: 70mm x 30mtrs., 100mm x 30mtrs.



9] PVC CASSETTES

Made of flexible PVC sheet of thickness 0.25 mm.
Double Envelop type cassettes ( Inner / Outer).
Folding type cassettes (Provided with Velcro seal )

Available Size in cm : 35 X 43, 30 X 40, 15 X 40, 10 X 40, 7.5 X 40, 10 X 20, 7.5 X 20
Available Size in inches : 3.5” x 10”, 3.5” x 17”, 4.5” x 10”, 4.5” x 17”, 5” x 7”, 8” x 10”, 7” x 17”, 14” x 17”

NOTE:
Cassettes of other sizes not shown above, available on request.
Cassettes for pipeline radiography width 70 mm x desired length and Width 100 mm x desired length are also available

Constructed by bonding a sheet of neoprene rubber between two high grade duct cloths secured together with dual chain stitch to give a rugged light-proof cassette. Proven reliability over many years.

Available Size: 70 mm, 3.5”, 4.5”, 5” , 7”

11] SPIDER (Source Positioning Device)



Special centering device for short length pipes and vessels.
Collapsible, self centering device (Spider) that can be put inside the pipe.
Light weight crawler self adjusts to suit the inside diameter of pipe.
Provision to fit collimator or guide tube / Isotope source.

[Available for Tech-ops/Gamma-Rid/Spec-2T/SU 50 projector]

12] DRIVE UNIT FOR GAMMA RAY PROJECTORS

A] Drive unit for Amertest [Techops] projector
B] Drive unit for Gammarid Projector
C] Drive unit for Spec – 2T
D] Drive unit for any other projector



13] GUIDE TUBE & EXTENSION TUBE

A] Source Guide Tube - 2 Meters long
B] Extension Tube - 2 Meters long
C] Source Holder [Pigtail for Techops 660 Projector]
D] Source Holder [Pigtail for Spec - 2T Projector]



14] COLLIMATORS

A] TUNGSTAN COLLIMATOR( Directional / Panoramic)
Directional : Diameter 60 mm
Panoramic : Diameter 60 mm
Directional : Diameter 50 mm
Panoramic : Diameter 50 mm